Rohde & Schwarz 1065.6000.20, Руководство по эксплуатации

Страница: 294 / 438

FSE TRIGger Subsystem
1065.6016.12 6.237 E-16
:TRIGger<1|2>[:SEQuence]:SLOPe POSitive | NEGative
This command selects the slope of the trigger signal.
Example:
":TRIG:SLOP NEG"
Features: *RST value: POSitive
SCPI: conforming
Modes: A, VA, BTS, MS
The selected trigger slope applies to all trigger signal sources.
:TRIGger<1|2>[:SEQuence]:VIDeo::FORMat:LPFRame 525 | 625
This command defines the number of lines per frame to be used (525 or 625 lines)
Example:
":TRIG:VID:FORM:LPFR 525"
Features: *RST value:
SCPI:
conforming
Mode: A-Z
This command is only valid if option FSE-B3, TV Demodulator, is fitted.
:TRIGger<1|2>[:SEQuence]:VIDeo:LINE:NUMBer <numeric value>
This command selects the horizontal synchronizing signal for triggering.
Example:
":TRIG:VID:LINE:NUMB 17"
Features: *RST value:
SCPI:
conforming
Mode: A-Z
The instrument is triggered at the specified line. This command is only valid if option FSE-B3, TV
Demodulator is fitted.
:TRIGger<1|2>[:SEQuence]:VIDeo:FIELd:SELect ALL | ODD | EVEN
This command selects the vertical synchronizing signal for triggering.
Example:
":TRIG:VID:FIEL:SEL ALL"
Features: *RST value:
SCPI:
conforming
Mode: A-Z
With the parameter ALL, the instrument is triggered when the field is changed, irrespective of the half
fields. With ODD, triggering by the first half field, with even, triggering by the second half field is
selected. This command is valid only if option FSE-B3, TV Demodulator, is fitted.