manualshive.com logo in svg

Rohde & Schwarz 1065.6000.20, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz 1065.6000.20 Скачать руководство пользователя страница 196

FSE                                                                                             MMEMory Subsystem

1065.6016.12

6.139

E-16

:MMEMory:SELect[:ITEM]:HWSettings    ON | OFF

This command includes the hardware settings in the list of data subsets of a device setting to be
stored/loaded.

Example:

":MMEM:SEL:HWS ON"

Features:

*RST value:

ON

SCPI:

device-specific

Modes:

A, VA, BTS, MS

Level and frequency lines are stored with this command as well.

:MMEMory:SELect[:ITEM]:TRACe<1 to 4>    ON | OFF

This command includes the data of the selected trace in the list of data subsets of a device setting to
be stored/loaded.

Example:

":MMEM:SEL:TRACE3 ON"

Features:

*RST value:

OFF for all Traces

SCPI:

device-specific

Modes:

A, VA, BTS, MS

:MMEMory:SELect[:ITEM]:LINes[:ACTive]   ON | OFF

This command includes the active limit lines in the list of data subsets of a device setting to be
stored/loaded.

Example:

":MMEM:SEL:LIN ON"

Features:

*RST value:

ON

SCPI:

device-specific

Modes:

A, VA, BTS, MS

Upon 

MMEM:LOAD 

the limit lines which are not currently active but contained in the data set are

restored as well.

:MMEMory:SELect[:ITEM]:LINes:ALL    ON | OFF

This command includes all limit lines in the list of data subsets of a device setting to be
stored/loaded.

Example:

":MMEM:SEL:LIN:ALL ON"

Features:

*RST value:

ON

SCPI:

device-specific

Modes:

A, VA, BTS, MS

This command includes selection of the active limit lines.

Содержание 1065.6000.20























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды