Rohde & Schwarz 1065.6000.20, Руководство по эксплуатации

Страница: 220 / 438

FSE SENSe Subsystem
1065.6016.12 6.163 E-16
SENSe Subsystem
The SENSe subsystem is itself divided up into several subsystems. The commands of these
subsystems directly control device-specific settings, they do not refer to the signal characteristics of the
measurement signal.
The SENSe subsystem controls the essential parameters of the analyzer and vector analyzer. In
accordance with the SCPI standard, it is for this reason optional, which means that it is not necessary to
include the SENSe node in command sequences.
In the split-screen representation, a distinction is made between SENSe1 and SENSe2:
SENSe1 =
^ screen A;
SENSe2 =
^ screen B
SENSe:ADEMod Subsystem
This subsystem controls the parameters for analog demodulation.
It is active only in conjunction with option Vector Signal Analysis, FSE-B7.
COMMAND PARAMETERS UNIT COMMENT
[SENSe<1|2>]
:ADEMod
:AF
:COUPling
:SQUelch
[:STATe]
:LEVel
:SBANd
:RTIMe
AC | DC
<Boolean>
<numeric_value>
NORMal | INVerse
<Boolean>
DBM
Vector Signal Analysis
:[SENSe<1|2>:]ADEMod:AF:COUPling AC | DC
This command selects coupling of the AF-branch.
Example:
":ADEM:AF:COUP DC"
Features: *RST value: AC
SCPI: device-specific
Mode: VA-A
:[SENSe<1|2>:]ADEMod:SQUelch[:STATe] ON | OFF
This command switches the squelch for the audio branch on or off.
Example:
":ADEM:SQU ON"
Features: *RST value: OFF
SCPI: device-specific
Mode: VA-A