32
<Basic Operation>
How to turn transmitter power ON/OFF
When turning on the power, the FX-32
transmitter will begin emmiting RF automatically
after it confirms the surrounding RF conditions.
When turning on the power of the transmitter
1. Turn on the power switch of the transmitter.
*If THR stick is high, the next WARNING screen will come
out. Moreover, if a power supply is switched on while SW
set by WARNING setup has been ON, it will be indicated by
WARNING.
2. When the throttle stick during Power On is
at the high side (or over 1/3 stick) a warning
will be displayed(Airplane/Helicopter). The
relevance SW is turned off if SW warning
comes out.
3. The upper screen came out. Next, if "RTN" is
pushed after uniting a cursor with "YES", it will
send.
How to stop the transmitter
1. Turn off the power switch of the transmitter.
*The transmitter shuts down at once.
Low battery alarm and auto shut-down
When the battery voltage reaches 7.2V, an
audible alarm will sound. Land your aircraft
immediately.
It can change from 6.8V to 7.6V by [SOUND] of
[SYSTEM MENU].
It recommends using it with an initial value.
Registration of the user's name
If so desired, the FX-32 transmitter can indicate
the owner's name.
User's name setup screen
1. Turn on the power of the transmitter.
2. Select [USER NAME] in the system menu and
push the EDIT button.
*The user name set up screen appears.
Current user name Input Box
Changing the user name
1. Change the user name as described below:
[Moving cursor in input box]
Select [←] or [→], and push the EDIT button.
[Deleting a character]
When [DELETE] is selected and the RTN button
is touched, the character immediately after
the cursor is deleted.
[Adding a character]
When a candidate character is selected
from the character list and the RTN button
is touched, that character is added at the
position immediately after the cursor.
*A name of up to 12 characters long can be entered as the
user name. (A space is also counted as 1 character.)
2. At the end of input, select [ENTER] and push
the EDIT button. (To terminate input and
return to the original state, select [CANCEL]
and push the EDIT button.)
THR Stick Slow
Содержание FX-32
Страница 1: ...Instruction Manual FX 32 No F8078 ...
Страница 9: ...9 Introduction Notes ...
