ROBBE-Futaba FX-32, Инструкция по эксплуатации

Страница: 111 / 180

111 <Functions of Linkage Menu>
COND.HOLD
Condition hold function
This function may be used to fix the maximum
speed of the engine so that you may adjust flight
conditions when the engine is running. An alarm
indicates that the function is operating. It will
prevent the engine from racing dangerously when
adjusting the idle-up settings.
While this function is active, the throttle servo
position is fixed at the point where you operate
when the function is activated. You must deactivate
this function when you are through making
adjustments.
The system will not allow you to activate/
deactivate this function in either of the following
states:
• When any of the flight condition switches
are on.
• When the throttle stick is higher than the
1/3 point.
To activate/deactivate condition hold:
(Home screen)
1. Move the cursor to [CND HOLD].
2. Set the throttle stick lower than the 1/3 point.
3.Touch the RTN button to activate the
condition hold function.
*When this function is active, "IS ON" appears at the right of
the [CND HOLD] display at the left bottom of the screen.
(LINKAGE menu/MODEL menu)
1. Move the cursor to [COND. HOLD].
2. Set the throttle stick lower than the 1/3 point.
3.Touch the RTN button to activate the
condition hold function.
*Operation is displayed at the bottom of the menu.
Function ON: "CND HOLD IS ON" is displayed.
Function OFF: "CND HOLD IS OFF" is displayed.