ROBBE-Futaba FX-32, Инструкция по эксплуатации

Страница: 15 / 180

15
<Before Use>
Switch (SA-SH)
(Switch Type)
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Short lever
• SD : 3 positions; Alternate; Long lever
• SE : 2 positions; Alternate; Long lever
• SG : 3 positions; Alternate; Short lever
• SH : 3 positions; Alternate; Short lever
*You can choose switch and set the ON/OFF-direction in the
setting screen of the mixing functions.
Upper Rotary Trimmers
T5
T6
T5 (right), T6 (Left):
The upper rotary trimmers T5 and T6 offer
analog input.
*The FX-32 transmitter beeps when the lever comes to the
center.
*You can select a slide lever and set the movement direction
on the setting screen of mixing functions.
Home/Exit and U.menu/Mon. Button
Volume
LD RD
Volume LD and RD:
The volume LD and RD knobs allow analog
input.
*The FX-32 transmitter beeps when the volume knob reaches
the center position.
*You can use each setting screen of the mixing functions to
select volumes and define the direction of a movement.
Rotary Trims
T1
T2
T3
T4
Rotary Trims T1, T2, T3 and T4:
This transmitter is equipped with four (4) rotary
trims. Each time you press a trim button, the trim
position moves one step. If you continue pressing it,
the trim position starts to move faster. In addition,
when the trim position returns to the center, the
tone will change. You can always monitor trim
positions by referencing the LCD screen.
*You can select the trim step amount and the display unit
on the home screen on the T1-T4 setting screen within the
linkage menu.
Note: The trim positions you have set will be stored in the
non-volatile memory and will remain there.
Home/Exit
Button
U.menu/Mon
Button
Press To Servo Monitor display
Press and hold To Model Select display
Home/Exit:
U.menu/Mon:
Press
Return to the previous
screen
Press and hold
Return to the Home
screen
It pushes from HOME
screen.
To TELEMETRY display
*There is no function of U.menu (user menu).
It is due to add by update.