ROBBE-Futaba FX-32, Инструкция по эксплуатации

Страница: 4 / 180

4 <Introduction>
INTRODUCTION
Thank you for purchasing a Futaba
®
FASSTest-2.4GHz
*
FX-32 series digital proportional R/C system. This
system is extremely versatile and may be used by beginners and pros alike. In order for you to make the best use
of your system and to fly safely, please read this manual carefully. If you have any difficulties while using your
system, please consult the manual, our online Frequently Asked Questions (on the web pages referenced below),
your hobby dealer, or the Futaba Service Center.
*FASSTest: Futaba Advanced Spread Spectrum Technology extend system telemetry
Due to unforeseen changes in production procedures, the information contained in this manual is subject to
change without notice.
Support and Service: It is recommended to have your Futaba equipment serviced annually during your hobby’s
“off season” to ensure safe operation.
Disposal
Disposal of equipment: this symbol attached to an item of electrical and electronic equipment
means that you are required to dispose of it separately from the general household waste when
it reaches the end of its useful life. Take your unwanted equipment to your local specialist waste
collection point or recycling centre. This applies to all countries of the European Union, and to other
European countries with a separate waste collection system.
GUARANTEE
All our products, including this radio control system, are guaranteed for the full statutory period of 24 months. If you wish to
make a valid claim under guarantee, please contact your dealer, who is responsible for the guarantee and the processing
of any guarantee claim. During the guarantee period we will correct any material defects or faults in operation or
manufacture at no cost to you. All other claims, e.g. in the case of consequent damage, are excluded from the guarantee.
The system must be returned to us carriage-paid; we will pay the cost of transport back to you. We will not accept
shipments sent C.O.D. We accept no liability for damage in transit or loss of your shipment; we recommend that you take
out suitable insurance to cover this.
Send your equipment to the robbe Service Centre for the country in which you live.
To process your guarantee claims the following conditions must be fulfilled:
• The purchase receipt must be included with your shipment.
• The units must have been operated in accordance with the operating instructions.
• Recommended batteries and genuine robbe accessories must have been used exclusively.
• Damage due to damp, tampering, reversed polarity, overloading and mechanical damage are not covered.
• Please be sure to include a succinct description of the problem to help us locate the fault or defect.
LIABILITY EXCLUSION
We at robbe Modellsport are not in a position to ensure that you observe the operating instructions, and have no influence
on the way you install, operate and maintain the radio control system components. For this reason we are obliged to
deny all liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of our
products, or which are connected with such operation in any way.
POST OFFICE REGULATIONS
The R&TTE (Radio Equipment & Telecommunications Terminal Equipment) Directive is the new European regulation,
which applies to radio systems and telecommunications apparatus, and is applicable to all such equipment, which has
general conformity approval in the EC.
One section of the R&TTE Directive regulates the setting up and operation of radio systems in the European Community.
An important change compared with earlier regulations is the abolition of approval procedures. The manufacturer or
importer must submit the radio system to a conformity assessment procedure before marketing the equipment, and is
obliged to notify the appropriate authority (register) when the process is completed.