Riello 20120391, Инструкции для установщика и технической поддержки

Страница: 183 / 188

183
OVERVIEW OF THE PARAMETERS
INSTALLATION
CONTROL IDENTIFICATION MENU – CTRL_ID
Point name Status Default Units Text displayed* Description
1
AQLD /
AQILD
Device description Device
2 Location description Location
3
ECG-SR-
XXY
Software code Software version
4 Serial number Serial number (MAC address)
* It depends on the selected language (English by default).
8.3 Network Parameters Menu (NETWORKS)
Icon Text displayed* Description Name
Config. ModbusRTU. Modbus RTU Configuration MODBUSRS
Config. Modbus TCP/IP Modbus Configuration on TCP/IP MODBUSIP
* It depends on the selected language (English by default).
NOTE: For further information on the Modbus option and its configuration, refer to the Modbus documentation.
9
As specific units may not include additional functions, some tables can contain parameters that cannot be set on certain
units.
MODBUSRTU CONFIG MENU – MODBUSRS
Point name Status Default Units Text displayed* Description
1 modrt_en no/yes 0 - RTU Server Enabling RTU Server enabled
2 ser_UID
From 1 to
255
1 - Server UID Server univocal identification
3 metric no/yes 1 - Metric Unit Metric unit selection
4 swap_b
From 0
to 1
0 - Swap Bytes "Swap Bytes" option
5 0 = Big Endian 0 = Big Endian
6 1 = Little Endian 1 = Little Endian
7 baudrate
From
9600 to
38400
9600 - Baudrate Transmission speed
8 parity bit
From 0
to 4
0 - Parity bit Parity bit
9 0 = no parity bit 0 = no parity bit
10 1 = odd parity bit 1 = odd parity bit
11 2 = even parity bit 2 = even parity bit
12 3 = parity bit low forcing 3 = parity bit low forcing
13 4 = parity bit high forcing 4 = parity bit high forcing
14 stop_bit
From 0
to 1
0 - Number of stop bits Number of stop bits
15 0= one stop bit 0 = one stop bit
16 1= two stop bits 1 = two stop bits
* It depends on the selected language (English by default).