Riello 20120391, Инструкции для установщика и технической поддержки

Страница: 140 / 188

140
CONTROL PANEL
INSTALLATION
− Press Save (1a) to save changes or Cancel (1b) to quit the
page without making any change.
1b
1a
From the language setting page it is also possible to select the
measurement system used by the user interface. After press-
ing Login it is possible to change the measurement system as
highlighted below.
OPERATING MODE SELECTION PAGE
Press the Start/Stop push-button with unit in Local Off mode
to display the list of the following available operating modes.
Local On
Local On: The unit is in local control
mode and can be started.
Local scheduling
Local scheduling: The unit is in local
control mode and can be started if the
period is occupied.
Network
Network: The unit is controlled from the
network controls and can be started if
the period is occupied.
Remote
Remote: The unit is controlled from ex-
ternal controls and can be started if the
period is occupied.
Master
Master: The unit operates as master/slave
unit and can be started if the period is
occupied.
Find below an example of selection of one of the possible
modes:
− Press Start/Stop .
− Select the mode using the arrows , then press on the
chosen mode .
1
2
9
If you want to change operating mode it is necessary to
stop the equipment first and then repeat the procedure
described above.
To stop the unit:
− Press Start/Stop .