Resvent iHope RS Series, Руководство пользователя

Страница: 253 / 261

F. Neonatal Ventilation
F-5
F.3 System check
Refer to 6.3 S ys tem check . Please make sure that the
system check is completed before initiation of neonatal
ventilation.
F.4 Start Ventilation
WARNING
• Before using the ventilator on the patient, check
that the oxygen concentration in the delivered gas
is consistent with the setting value.
•
Adopt manual ventilation immediately if the
ventilator malfunctions and cannot continue
ventilating the patient.
1. For patient information setup, please see 6.3 Select
Patient.
2. For ventilation type setup, please see
6.4 Ventilation
Typ e
.
3. For ventilation mode setup, please see 6.5
Ventilation Mo d e .
4. For alarm setup, please see 7 Ala r m s .
5. Select the [
Start Ventilation
] key in Standby status,
and the system begins to ventilate the patient
according to your settings.
F.5 Backup Ventilation
In the event of a neonatal flow sensor error, the
ventilator will switch to backup ventilation. During
backup ventilation, the user should take corrective
measures in a timely manner, including replacing the
neonatal flow sensor or using external flow monitoring.
During backup ventilation, the ventilator runs the
pressure mode with the delivered inspiratory pressure
being equal to PEEP +15 cmH
2
O. Other ventilation
parameters are identical to those in the original
ventilation mode.