Resvent iHope RS Series, Руководство пользователя

Страница: 188 / 261

10-2
10. Cleaning and Disinfection
with body fluids and expired gases during
both NORMAL CONDITION and SINGLE FAULT
CONDITION.
• Do not use organic, halogenated, or petroleum
based solvents, anesthetic agents,glass cleaners,
acetone, or other harsh cleaning agents.
• Do not use abrasive cleaning agents (such as steel
wool, silver polish, or cleaner).
10.1 Methods
Parts marked 134℃ are autoclavable. Recommended
temperature is 134ºC. By using autoclave to increase
vapor pressure, the temperature also increases, rapidly
solidifying bacterioprotein. The disinfection effect of
this method is fast and reliable.
Some of the ventilator’s parts can be cleaned and
disinfected. Different parts of the ventilator should
be disinfected using different methods. You need to
select the appropriate method to clean and disinfect
the parts based on the actual situations to avoid cross-
contamination between the ventilator user and the
patient.
This table is our recommended cleaning and
disinfection methods for the ventilator parts, including
use for the first time and use after many times.
Cleaning Methods
Wipe
: wipe with a damp cloth immersed in alkalescent
detergent (soapy water, etc.) or alcohol solution, and
then wipe off the remaining detergent with a dry lint-
free cloth.
Immersion
: flush with water first and then immerse
it in alkalescent detergent (soapy water, etc., water
temperature of 40ºC recommended) for approximately
three minutes. Finally, clean with water and dry
completely.
Methods for Disinfection