Resvent iHope RS Series, Руководство пользователя

Страница: 19 / 261

1-7
1. Safety Information
• To prevent possible device damage, avoid tipping
over the ventilator when crossing thresholds.
• To prevent possible device damage, step down the
brake when parking the ventilator.
• A turbofan can cause gas to be heated. To reduce
the temperature of gas inside the tube and prevent
patient injury accordingly, make sure that the
length of patient tube from the humidifier to Y
piece is greater than 1.2m.
• To reduce the risk that the patient will aspirate
condensed water from the breathing circuit,
position any humidifier lower than both the
ventilator and the patient.
• The ventilator shall not be used with nitric oxide.
• It is recommended to connect this equipment
to equipotential system. Use yellow and green
equipotential grounding cables, one end is
connected to position with symbol, and other end is
connected to equipotential system. Use of potential
equalization conductor together with a reference
to requirements in clause 16 of IEC 60601-1 for
Medical Electrical System.
• Additional equipment connected to medical
electrical equipment through the network/data
coupling must comply with the respective IEC or
ISO standards (e.g. IEC 60950 for data processing
equipment). Furthermore, all configurations
shall comply with the requirements for medical
electrical systems (see IEC 60601-1-1 or clause
16 of the 3.1Ed. of IEC 60601-1, respectively).
Anybody connecting additional equipment to
medical electrical equipment configurations a
medical system and is therefore responsible that
the system complies with the requirements for
medical electrical systems. Attention is drawn to
the fact that local laws take priority over the above
mentioned requirements. If in doubt, consult
your local representative or the technical service
department.