Resvent iHope RS Series, Руководство пользователя

Страница: 17 / 261

1-5
1. Safety Information
• The physiological parameters and alarm messages
displayed on the screen of the ventilator are for
doctor’s reference only and cannot be directly used
as the basis for clinical treatment.
• To reduce the risk of fire, use only patient circuits
intended for use in oxygen-enriched environments.
Do not use antistatic or electrically conductive
tubing.
• Be sure to set the high inspiratory pressure alarm
appropriately to minimize patient risk from
overpressurization or early breath termination.
• To minimize patient risk from aspiration of
condensate, use either a circuit with water traps or
a heated wire circuit.
• The patient’s exhaled volume can differ from the
measured exhaled volume due to leaks around
the mask during noninvasive ventilation. We
recommend that you set the leak alarm to detect
and notify when a clinically significant leak occurs.
• To prevent unintentional disconnection of the
power cord, always use the correct specified power
cord and lock it into place with the power cord
retainer before use. The plug is used as disconnect
device to the mains supply, do not to position
the equipment so that it is difficult to operate the
disconnection device.
• To reduce the risk of electric shock, connect the
ventilator to an AC supply mains with protective
earth only.
• A ventilator shutdown due to a total loss of power
during ventilation poses serious risks to the patient.
Always have a backup battery built-in and fully
charged.
• The backup battery must be fitted in the ventilator.
Periodically check and replace the battery as
needed. Refer servicing to qualified service
personnel.