Resvent iHope RS Series, Руководство пользователя

Страница: 18 / 261

1-6
1. Safety Information
• The battery is intended for backup or transport
use only. Battery operation time can be affected by
discharge and recharge cycles, time, and ambient
temperature. Using the battery as primary power
source increases patient risk resulting from a
ventilator shutdown due to total power loss.
• Use external power source before the batteries are
depleted.
• It is the responsibility of the end user to validate the
compatibility and use of information transmitted
from the ventilator to the device to be connected to
the ventilator.
• Do not use this equipment in an MRI environment.
• To dispose of the package material, observing the
applicable waste control regulations and keeping it
out of children’s reach.
• To prevent possible patient injury, maintenance
mode can only be used when the ventilator is
disconnected from the patient.
• Nebulization or humidification can increase the
resistance of breathing system filters and that
you need to monitor the breathing system filters
frequently for increased resistance and blockage.
• The ventilation accuracy can be affected by the gas
added by use of a nebulizer.
• As required by the relevant rules and regulations,
oxygen concentration should be monitored when
the equipment is used on the patient. If your
ventilator is not configured with such monitoring
function or this functionon your ventilator is
turned off, use a monitor which complies with
the requirements of ISO 80601-2-55 for oxygen
concentration monitoring.
• Do not move the ventilator before removing the
support arm from it, in order to avoid the ventilator
getting tilted during the movement.