Resvent iHope RS Series, Руководство пользователя

Страница: 242 / 261

D-2
D. EMC Declarations
Table D-1.Guidance and manufacturer's declaration-
electromagnetic emissions
Emissions test Compliance
Electromagnetic environment -
guidance
RF emissions CISPR 11 Group 1
The ventilator uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions CISPR 11 Class A The ventilator is suitable for use
in all establishments other than
domestic and those directly
connected to the public low-
voltage power supply network
that supplies buildings for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
TableD-2.Guidance and manufacturer's declaration-
electromagnetic immunity
Immunity test
IEC 60601-1-2 test
level
Compliance
level
Electromagnetic
environment - guidance
Electrostatic
discharge
(ESD) IEC
61000-4-2
±8 kV con tact
±15 kV air
±8 kV con
tact ±15 kV
air
Floors should be wood,
concrete, or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
Electrical fast
transient/
burst IEC
61000-4-4 ±2 kV for power
sup- ply lines ±1
kV for input/out-
put lines (>3 m)
±2 kV for
power sup-
ply lines
±1 kV for
input/out-
put lines
(>3 m)
Mains power quality
should be that of a typical
commercial or hospital
environment.