Resvent iHope RS Series, Руководство пользователя

Страница: 52 / 261

3-14
3. Installations and Connections
1
2
1
Oxygen supply inlet
2
Oxygen supply hose
Figure 3-7.Connecting the oxygen supply
To connect the high-pressure oxygen supply as follows:
1. Before connecting the oxygen supply hose, check
if the sealing ring at the gas supply connection is
in good condition. If the sealing ring is damaged,
do not use the hose and replace the sealing ring to
prevent leakage.
2. Align and connect the fitting to the inlet of the
high-pressure oxygen supply at the back of the
ventilator.
3. Make sure the gas supply hose is connected to the
gas supply inlet, then tighten the hose nut.
To connect the low-pressure oxygen supply as follows:
1. Depress the metal dome on the low-pressure
oxygen supply connector.
2. Align the oxygen supply hose with and insert it into
the low-pressure oxygen supply connector.