Resvent iHope RS Series, Руководство пользователя

Страница: 14 / 261

1-2
1. Safety Information
• An alternative means of ventilation shall be
available whenever the ventilator is in use. If a fault
is detected in the ventilator, disconnect the patient
from it and immediately start ventilation with such
a device. For example, using a manual respirator.
• Before use, the ventilator, cables and accessories
must be inspected to ensure that they can work
normally and safely.
• Users should set alarm volume and alarm limits
based on patients’ actual condition. Do not rely
exclusively on the audible alarm system for patient
monitoring. Adjustment of alarm volume to a low
level may result in a hazard to the patient. Always
keep the patient under close surveillance.
• All staff should be aware that disassembling or
cleaning some parts of the ventilator can cause risk
of infection.
• Using the ventilator in the vicinity of high frequency
electrosurgery equipment, defibrillators or short-
wave therapy equipment may impair correct
functioning of the ventilator and endanger the
patient.
• Do not place the ventilator adjacent to any barrier,
which can prevent cold air from flowing, resulting in
equipment overheat.
• If the equipment internal monitoring system
malfunctions, an alternative plan must be available
to ensure adequate level of monitoring. The
operator of the ventilator must be responsible for
patient’s proper ventilation and safety under all
circumstances.
• Do not touch the patient when connecting the
peripheral equipment via the I/O signal ports or
replacing the O
2
cell, to prevent patient leakage
current from exceeding the requirements specified
by the standard.
• The maximum pressure of hose is 1.4 MPa @21℃