Resvent iHope RS Series, Руководство пользователя

Страница: 20 / 261

1-8
1. Safety Information
• A potential hazard can exist if different alarm
presets are used for the same or similar equipment
in any single area.
• Ensure that all breathing system parts are dry every
time when the breathing system is cleaned and
disinfected.
• Check the expiration valve for water build-up when
abnormal flow waveform or unstable tidal volume
fluctuation is detected. If there is water build-up
inside the expiration valve, clear it.
1.1.2 CAUTION
• The ventilator is intended for use by healthcare
professionals only.
• At the end of the ventilator service life, the
equipment and its accessories, must be disposed
of in compliance with the guidelines regulating the
disposal of such products.
• Grounding reliability can only be achieved when
equipment is connected to an appropriate voltage
receptacle marked “hospital only” or “hospital
grade.”
• To prevent possible damage to the ventilator, use
only those cleaning agents listed in this manual.
• To prevent possible damage to the ventilator, do
not drip or spray any liquids directly onto any
surface.
• Do not attempt to sterilize or autoclave the
ventilator.
• To reduce the risk of electrical shock, disconnect
electrical power from the ventilator before cleaning.
• To reduce the risk of fire, do not use a high-pressure
oxygen hose that is worn or contaminated with
combustible materials like grease or oil.
• To prevent possible damage to the ventilator,