Redfox MPD 0511 E, Инструкции по установке и использованию

Страница: 110 / 307

8
We recommend you strictly comply with fire-prevention regulations in
force�
A minimum distance of 50 mm on each side must be maintained
between the oven and the
walls or other equipment�
It is advisable to leave 500
mm space between the left
side of the oven and the
corresponding wall of the
room ( Fig. 2 ) to allow the
oven to be installed easily
and facilitate successive
maintenance�
It is good practice to have
the periodic maintenance
of the ovens performed
every year by an authorised
technician and in compliance with specific regulations. On this occasion
all controls regarding the operation of electric components (switches,
electronics, solenoid valves, heating elements, motors, cooling fans,
etc�) and the mechanical controls relative to functionality of the doors,
hinges, closing mechanisms, and gaskets will be performed�
1.3 Water connection
The water pressure must be of maximum (600 kPa) 6 bars� If the
water pressure of the mains
water should be over this value, a
pressure reducer must be installed
upstream from the oven�
The minimum water pressure for
correct operation of the oven must
be above 1�5 bar�
The oven has a mains water
inlet (1)� The installation of a
lime scale softener-eliminator is
always recommended to bring the
hardness of inlet water to values
between 8° and 10°F�
Before connection, drain off a
sufficient amount of water to clean
Fig.3
1
50 mm
500 mm
50
mm
Fig. 5
Fig 2