Redfox MPD 0511 E, Инструкции по установке и использованию

Страница: 126 / 307

24
successive phases, which must however be started manually� E�g� in the
night time cooking of roast dishes, you may prefer to brown the dish
when the operator returns to the kitchen, therefore after the hold phase�
To pass from one cooking phase to another, press and hold the number
of the phase you want to move to, or use the arrows to select the desired
phase number and press the "GO" button next to the phase number�
The program of a specific phase can be started (different from the
first set): after having selected the program, press the “Advanced
Customisation” key and use the arrow to go to the desired phase� On
pressing Start, the program will start from this phase� If pre-heating
was envisioned in this program, it will not be performed� The program
can be modified using the Cooking Tuner interface before pressing the
"Advanced Customisation" button�
2.6 Creating a cooking program
A cooking program is made up of several phases, which the oven
performs in ascending order (phase 1, phase 2, phase 3���) moving from
one to another automatically�
After setting the parameters for the
initial phase (phase 1), press the new
phase (button
11
) to create the next
phase�
Then, set the parameters for phase 2�
Continue with steps 1 and 2 to create
additional phases� You can also create
and enter new phases between previously created phases� The new
phase will be place under the one selected when you press the “new
phase” button�
At the end of programming, press START to start cooking� To delete a
phase, select it and press the button “ Eliminate Phase ” (button
12
)�
Setting a cooling phase between two phases
The temperature inside the oven chamber may have to be cooled between
one phase and another� For example, when roasting the chamber needs
to be cooled between the browning phase (at high temperature) and the
cooking phase (at low temperature)�
This operation can be performed automatically by the oven by setting
an automatic cooling phase�
START
11
12