RADWAG UYA 4Y, Руководство пользователя

Страница: 38 / 196

- 38 -
A custom measuring unit features:
•
A multiplier
•
A name (3 characters)
Upon completed operation of designing a custom unit its name is added to the list of accessible
measuring units.
Units menu additionally enables entering the value of gravitational acceleration force for balance’s
place of use. It is obligatory should a balance be used to determine mass in [N].
14. WORKING MODES
Standard 3Y series features the following working modes:
Weighing Parts counting
Means of operation: weight of a load is
determined through an indirect measurement. A
balance measures gravitational force which
attracts the load. An obtained result is
processed to a digital format and displayed in a
form of measurement result. Means of operation: based on a determined
mass of a single part it is possible to count
another parts, assuming that mass of a single
part is determined with sufficient accuracy, and
that the following parts are equal in mass.
Checkweighing Dosing
Means of operation: control of sample mass
with applied thresholds. You have to specify the
value of low threshold <LO> and high threshold
<HI>. Means of operation: you have to specify
sample’s target mass to be obtained by pouring.
Percent Weighing Density
Means of operation: control of percent ratio of a
sample in relation to a standard mass
(reference weight). Obtained data provides
percent ratio on how test sample differs from
the accepted standard mass (reference
sample). Means of operation: based on Archimedes
principle, a balance determines density of solids
and liquids. The mode requires an optional
density determination kit.
Animal Weighing Formulations
Means of operation: mass measurement takes
place with application of filters dampening
animal moves on a weighing pan, thus enabling
obtaining a correct measurement result. Means of operation: by adding a order of
ingredients, you can prepare an optional mixture
or formulation. Before mixing balance software
requires designing a formulation by specifying its
ingredients and their mass.
Statistics Pipettes calibration
Means of operation: carried out measurements
are used to calculate statistical data, such as
Min, Max, deviation, etc. Means of operation: calibration of pipettes
according to procedures listed in ISO 8655 or
according to user requirements.