RADWAG UYA 4Y, Руководство пользователя

Страница: 130 / 196

- 130 -
30.11. PIPETTE CALIBRATION REPORTS
Reports contain data on completed pipette calibration processes. In case of multichannel pipettes,
the reports are generated for each channel separately. Each report can be previewed, searched by
date, exported or printed.
Procedure:
1. Enter submenu < Databases>, and press < Pipette calibration reports>.
2. Press field of a desired report record, unless it is visible on the top of the list, wind the list
forward using navigating keys.
3. Report’s name consists of date and time of its creation,
e.g.: 2012.03.12 11:12:15.
Caution:
It is possible to use an option for searching a report.
List of data:
Pipette [name from the database of pipettes]
Serial no. [serial no. inserted during calibration process]
Channel no.
Start date
End date
User [name of a user carrying out calibration]
Customer [customer name]
Measurements quantity [measurements quantity for each tested volume]
Operation with adhere to
ISO 8655 [information if errors comply with the standard]
Status [information whether the errors are below permissible
value accepted for the tested volume]
Temperature [average temperature value during calibration process]
Humidity [average humidity value during calibration process]
Pressure [average pressure value during calibration process]
Water temperature [average water temperature during calibration process]
Z coefficient [value if the Z coefficient for given temperature]
30.12. SERIES
Series database contains data saved for a series and measurements of samples.
Procedure:
1. Enter submenu < Databases>, and press < Series> field.
2. Press < Add > key to add a new series.
3. If a series already exists in the database, press field with its name to edit data that can be
modified.
List of data defined for series:
1. Name
2. Code
3. Customer
4. Samples
5. Number of samples