RADWAG UYA 4Y, Руководство пользователя

Страница: 151 / 196

- 151 -
•
Print
•
Percent weighing: set 100%
•
Header printout
•
Solid density
•
Footer printout
•
Liquid density
•
Universal variable 1
÷
5
•
Air density
•
Accept
•
Automatic Weight Crane Control
•
Abort
•
Task
•
User
•
Standard
•
Left door
On changing the logic status of the input system, e.g. from [0] to [1], a function that is assigned to the
system is carried out. For instance:
•
Carrying out automatic adjustment process to check balance’s accuracy,
•
Displaying the value of set checkweighing thresholds, or
•
Restoring tare value to weigh net mass of measured load.
Procedure:
1. Press key and next press: “ Inputs / Outputs” key.
2. Enter submenu < Inputs / Outputs> , select and press < Inputs> key.
3. Enter editing mode of a selected input; list of available functions is displayed.
4. Select a function from displayed list and return to weighing.
Application of outputs:
Outputs are used to SIGNAL the status of measurement result. Change of logic status of the output
system, e.g. from [0] to [1], takes place on meeting a requirement assigned to the output.
Each of 4 outputs is connectable to the following data:
Available options Balance status switching output logic
None -------
Stable Each stable measurement switches the logic of the system.
MIN stable Stable measurement below [MIN] threshold switches the
logic of the system.
MIN unstable Unstable measurement below [MIN] threshold switches the
logic of the system.
OK stable Stable measurement within [MIN] [MAX] thresholds
switches the logic of the system.
OK unstable Unstable measurement within [MIN] [MAX] thresholds
switches the logic of the system.
MAX stable Stable measurement below [MAX] threshold switches the
logic of the system.
MAX unstable Unstable measurement below [MAX] threshold switches the
logic of the system.
Confirmation of cycle
completion End of procedure.