Pulsar UltraTWIN, Инструкция по эксплуатации

Страница: 56 / 214

ULTRATWIN (UL) INSTRUCTION MANUAL
56
To program the UltraTWIN for Example 3 Volume Application with
Control by using the Quick Setup menu proceed as follows. If required
access the Program Mode and key in the passcode 1997 and press ENTER.
Using the ‘right’ arrow key, go to the Quick Setup menu press ENTER and
as prompted, by the questions, select the relevant option and ENTER .
Programming is now complete, and the unit can be returned to the run
mode, press
CANCEL until Run Mode? Is displayed on the LCD press
ENTER , and the UltraTWIN will return to the Run Mode .
QUESTION OPTION
Application 2 = Volume
Level/Volume
2 = Volume App.
Control
1 = Control down
No. of controls
1 = 1 Relay
Control no.1
1 = Set to relay 1
No. of alarms
2 = 2 Alarms
Type alarm 1
1 = High
Alarm no.1
4 = Set Relay 4
Type alarm 2
2 = Low
Alarm no.2
5 = Set Relay 5
Xducer (P101)
2 = dB6
Material (P102)
1 = Liquid
Measurement units (P104)
4 = feet
Empty Level (P105)
11.0 feet
Span (P106)
10.0 feet
Vessel shape (P600)
0 = Cylindrical flat base
Vessel dimensions
Enter vessel dimensions as requested (depends
on vessel shape chosen)
Volume units
Select as required
Max Volume (Read only)
Displays the Max volume as calculated by the
UltraTWIN