Pulsar UltraTWIN, Инструкция по эксплуатации

Страница: 137 / 214

PULSAR MEASUREMENT
137
The third parameter has no function when miscellaneous relay is chosen
and will not be displayed.
The
fourth parameter , and fifth parameter , are set to determine the switch
points, “ ON ” and “ OFF ” for the relay. See miscellaneous function table
( P*211, 221, 231, 241, 251, 261 ) for further information.
P*211, 221, 231, 241, 251, 261 = 1 (Clock)
P*213, 223, 233, 243, 253, 263 – Relay Setpoint 1
Relay Setpoints are entered in Hours & Minutes (HH:MM) to set Time at
which relay will energise. Default =
00:00 ( HH:MM )
P*214, 224, 234, 244, 254, 264 – Relay Setpoint 2
Relay Setpoints are entered in seconds to set the Time Period that the relay
will rem ain ‘ON’. Default = 0.00 mins.
P*210, 220, 230= 2 (Totaliser)
P*213, 223, 233, 243, 253, 263 – Relay Setpoint 1
Relay Setpoints are entered as a factor by which the on-board totaliser
(P*820) should be multiplied by to provide a relay closure.
Default = 0.00
P*214, 224, 234, 244, 254, 264 – Relay Setpoint 2
Relay Setpoints are entered in seconds to set the Time Period that the relay
will remain ‘ON’. Default = 0.00 secs.
P*216, P226, P236, P246, P256, P266 - Relay Allocation
When P*211, 221, 231, 241, 251, 261 = 1 (Clock)
This parameter has no function and will not be displayed.
When P*211, 221, 231, 241, 251, 261 = 2 (Totaliser)
This parameter determines which totaliser the relay is assigned to.
OPTIONS DESCRIPTION
1 = Totaliser 1 (Default)
Relay acts on Totaliser 1 calculated values.
2 = Totaliser 2
Relay acts on Totaliser 2 calculated values.