PULSAR MEASUREMENT
201
P*940 Number of Starts
This parameter shows how many times the unit has been powered up.
P*941-P*960 Start Date & Time
Parameters
P*941
and
P*942
show the
date
and
time
that the unit was last
started. There are
ten start dates & times
recorded, which are parameters
P*943-P*960
. The first on the list are the most recent, and the last ones are
the oldest. These are read only and cannot be changed.
Daylight Saving Time
P*970 DST Enable
When
Enabled
(set to
1
) the internal clock will be automatically adjusted to
compensate for the difference between standard time and
Daylight-Saving
Time.
Default = 1 (Yes)
P*971 DST Difference
This parameter sets the time difference between standard time and
Daylight-Saving Time.
The time difference is entered in HH:MM.
Default = 01:00
P*972 DST Start Time
This parameter is used to set the
time
of day at which
Daylight-Saving
Time
will
start
, the time is entered in the format HH: MM (24-hour format).
Default = 02:00
Important Notice
In order to ensure the correct operation of Daylight-Saving Time P*932
Time should be checked, and adjusted if necessary, to ensure that it is set
for the current valid time.
Содержание UltraTWIN
