Pulsar UltraTWIN, Инструкция по эксплуатации

Страница: 116 / 214

ULTRATWIN (UL) INSTRUCTION MANUAL
116
P*101 Xducer (Transducer)
This parameter should be set to the transducer being used with the unit, and
can be set to one of the following:
OPTION DESCRIPTION
When P*100 = 1 (Distance), 2 (Level), 3 (Space) or 6 (Volume)
0 = None
No Transducer connected. By default, the relevant display will
show “Not In Use” unless allocated to the point of
measurement in use.
1 = dB3 Transducer is a dB3. Range = 0.41 to 9.84 feet
2 = dB6 (default) Transducer is a dB6. Range = 0.98 to 19.68 feet
3 = dB10 Transducer is a dB10. Range = 0.98 to 32.80 feet
4 = dB15 Transducer is a dB15. Range = 1.64 to 49.21 feet
5 = dB25 Transducer is a dB25. Range = 1.96 to 82.02 feet
6 = dB40 Transducer is a dB40. Range = 3.93 to 131.23 feet
7 = dBS6 Transducer is a dBS6. Range = 0.65 to 19.68 feet
8 = dBMach3 Transducer is a dBMach3. Range 0.0 to 7.95 feet
When P*100 = (OCM Head) or 5 (OCM Flow)
8 = dBMach3
(Default)
Transducer is a dBMach3. Range 0.0 to 7.95 feet
2 = dB6 Transducer is a dB6. Range = 0.98 to 19.68 feet
3 = dB10 Transducer is a dB10. Range = 0.98 to 32.80 feet
4 = dB15 Transducer is a dB15. Range = 1.64 to 82.02 feet
7 = dBS6 Transducer is a dBS6. Range = 0.65 to 19.68 feet
Available for all modes selected in P*100
*11 = dBR16 Transducer is a mmWave radar. Range 0.252 to 52.49 feet
*12 = dBR8 Transducer is a mmWave radar. Range 0.252 to 26.25 feet
Important Notice
The choices of transducers available will be dependent on the Mode,
(P*100, P*100), selected and will vary from application to application.
*
Please consult your local Pulsar distributor for the versions of firmware
that the mmWAVE radars are available in.