Pulsar UltraTWIN, Инструкция по эксплуатации

Страница: 52 / 214

ULTRATWIN (UL) INSTRUCTION MANUAL
52
To program the UltraTWIN for Example 1 Level Monitoring with Alarms
by using the Quick Setup menu proceed as follows. If required to access
Program Mode, key in the passcode 1997 and press ENTER,
At the Quick Setup menu press ENTER and as prompted, by the questions,
select the relevant option and ENTER .
QUESTION OPTION
Level/Volume 1 = Level App.
No. of alarms 2 = 2 Alarms
Type alarm 1 1 = High
Alarm no.1 1 = Set to relay 1
Type alarm 2 2 = Low
Alarm no.2 2 = Set relay 2
Xducer (P*101) 2 = dB6
Material (P*102) 1 = Liquid
Measurement units (P*104) 4 = feet
Empty Level (P*105) 11 feet
Span (P*106) 10 feet
Programming is now complete, and the unit can be returned to the run
mode, press
CANCEL until Run Mode? Is displayed on the LCD press
ENTER , and the UltraTWIN will return to the Run Mode .
Important Notice
If relay setpoints do not meet the exact requirements of the application,
they can be modified to suit by pressing ENTER when, “For More Options
Hit Enter”, is displayed, and entering new values to relay setpoints as
required. Alternatively, the relevant relay setpoint can be accessed either
by the main menu system or directly via parameter number and changed,
as necessary.