PT PT610 Скачать руководство пользователя страница 73

Страница: 73 / 92

www.ptglobal.com

PT610, PT620, PT630

Instruction Manual

6.2.9.2 [19_] – Ethernet TCP/IP

Note:

Not available for the PT620.Only active if the option card is fitted to the PT610, PT630

The meaning of the parameters

[191]

[19D]

is the same as for the parameters

[151]

[15D]

6.2.5.

Note:

The PT610 does not have a BARC print format.

6.2.9.3 [19_] – PROFIBUS

Note:

Not available for the PT620.Only active if the Ethercat option card is fitted to the PT610, PT630.

This sub-block includes the parameters related to the PROFIBUS interface of the indicator.

[191 FORMAT] – Data Format

INTG = Signed 32 bit integer, no decimal point implied.
FLOA = 32 bit float, decimal point implied.

[192 ADDRESS] – Rack Address

Enter a value between 001 and 125 for the rack address of the Indicator.

6.2.9.4 [19_] – PROFINET, Ethernet/IP

Note:

Not available for the PT620.Only active if the option card is fitted to the PT610, PT630.

This sub-block includes the parameters related to the PROFINET or Ethernet/IPinterface of the

indicator.

[191 FORMAT] – Data Format

INTG = Signed 32 bit integer, no decimal point implied.
FLOA = 32 bit float, decimal point implied.

[192 IP] – IP Address

Enter the IP address with the keypad. The default is “192.168.16.250”.

[194 SUB MASK] – Subnet Mask

Enter the subnet mask. The default is “255.255.255.0”.

[195 GATEWAY] – Gateway Address

Enter the IP address of the gatewaywith the keypad. The default is “192.168.16.253”.

[196 SCAL] – Device Name

Default is SCALE-1

Note:

Present for ProfiNET but not for Ethernet/IP

[19A MAC ADR] – MAC Address

Enter a MAC address for the port. The format is “AA=BB=CC=DD=EE=FF”

6.2.9.5 [19_] – CANopen

Note:

Not available for the PT620.Only active if the option card is fitted to the PT610, PT630

This sub-block includes the parameters related to the CANopen interface of the indicator.

[191 FORMAT] – Data Format

INTG = Signed 32 bit integer, no decimal point implied.
FLOA = 32 bit float, decimal point implied.

[192 ADDRESS] – Rack Address

Enter a value between 001 and 127 for the rack address of the indicator.

6.2.9.6 [19_] – Ethercat

Note:

Not available for the PT620.Only active if the option card is fitted to the PT610, PT630

This sub-block includes the parameters related to the Ethercat interface of the indicator.

[191 FORMAT] – Data Format

INTG = Signed 32 bit integer, no decimal point implied.

FLOA = 32 bit float, decimal point implied.

6.2.9.7 [19_] – CC-Link

Note:

Not available for the PT620.Only active if the option card is fitted to the PT610, PT630

This sub-block includes the parameters related to the CC-Link interface of the indicator.

Содержание PT610





























































































Результаты поиска

Содержание PT610

Отзывы:

PT PT610, Основное руководство пользователя, Страница: 73 / 92

Результаты поиска

Содержание PT610

Отзывы: