PT PT610 Скачать руководство пользователя страница 76

Страница: 76 / 92

www.ptglobal.com

PT610, PT620, PT630

Instruction Manual

UNIT = Unit change

6.3.4.4 [244 RGHT IR] – <IRR> function

Note:

Applicable to PT630 only.

NO = Disable

ID1 = ID1 key

ID2 = ID2 key

M+ = Memory plus key

MRC = Memory read/clear key

ZERO = Zero key

TARE = Tare key

CLR = Clear key

T/C = Tare/Clear

PRNT = Print

6.3.4.5 [245 LEFT IR] – <IRL> function

Note:

Applicable to PT630 only.

NO = Disable

ID1 = ID1 key

ID2 = ID2 key

M+ = Memory plus key

MRC = Memory read/clear key

ZERO = Zero key

TARE = Tare key

CLR = Clear key

T/C = Tare/Clear

PRNT = Print

6.3.5 [25_] – Initial data entry

These parameters configure the initial time/date/ticket number and scale name.

6.3.5.1 [251 DATE] – Date format

DMY = DD.MM.YYYY

MDY = MM.DD.YYYY

YMD = YYYY.MM.DD

6.3.5.2 [252 Date set] – Date setting

Set the date in the format XX.XX.XX

6.3.5.3 [253 TIME SET] – Time setting

Set the time in the format HH.MM

6.3.5.4 [254 CN] – Ticket number

Set the starting number for the CN printed on weigh tickets or data output.

6.3.5.5 [255 S.NAME] – Scale name

The scale can be given a name to identify the weigh location.

Set the name for the scale, maximum 16 characters. Default = SCALE-1.

6.3.6 [26_] – Passwords

Note:

Not present on the PT610. These parameters are only available for the PT620 and PT630.

6.3.6.1 [261 KEY LOCK] – Keys password

Press

<ENTER>

at the prompt

[NEW]

and enter a new password. Default = 11.

6.3.6.2 [262 USER] – User password

Press

<ENTER>

at the prompt

[NEW-CONFIRM]

and enter a new password. Default = 1111.

6.3.6.3 [263 SERVICE] – Service password

Press

<ENTER>

at the prompt

[NEW-CONFIRM]

and enter a new password. Default = 1111.

6.4 [3--] – APPLICATION PARAMETERS

6.4.1 [31_] – EzAz smart applications

Note:

Not present on the PT610. These parameters are only available for the PT620 and PT630.

The PT620 and PT630 have smart applications built in to make check weighing, classifying and filling

operations EzAz.

6.4.1.1 [311 APPLICA] – EzAz application

NO = EzAz applications disabled.

CHEC = Check weighing mode,

CLAS = Classifying mode,

FILL = Filling mode,

Содержание PT610





























































































Результаты поиска

Содержание PT610

Отзывы:

PT PT610, Основное руководство пользователя, Страница: 76 / 92

Результаты поиска

Содержание PT610

Отзывы: