PT610, PT620, PT630
Instruction Manual
29
2. The last entered preset tare memory code seen.
3. Use the numerical keys to enter the preset tare memory code, or press the
<UP>
or
<DOWN>
keys to navigate to the desired memory location.
4. Press the
<ENTER>
key to accept this preset tare value, or press the
<ESC>
key to return to
normal operation.
5.3.8 Identification Memory
Applies to PT620 and PT630.
APPLICATION: To enter identification data into the instrument to printout or to transfer other data
together with identification data.
RELATED PARAMETERS: Sub-block [37-] (6.4.7).
The PT620 and PT630 indicators have 2 identification keys ID1 and ID2 available (define function key
for PT620) for storing identification data. Each identification key has an alphanumeric identification
name and data. The identification data can be saved into the ID1 and ID2 memories, each has 500
locations with a 32 character identification data record size.
The identification data can be entered via keys or selected from ID memory to transfer together with the
weight value. The length of identification name can be a maximum 16 characters and the length of
identification data can be up to 32 characters. ID name is entered in the programming mode.
ID data in the memory can be linked to the PT, SET and/or APW memory records. This feature
provides an advantage when selecting the related records automatically by selecting the ID from
memory. For example, if APW memory is linked to ID1 memory, the 123
th
record in the APW memory is
loaded automatically after loading the 123rd record from ID1 memory.
The descriptions below are given for the ID1 key. The usage of ID2 is the same.
Identification data - entering via alphanumeric keys
1. Press the identification key
<ID1>
.
2. Enter the identification data up to 32 digits via alphanumeric keys.
3. Confirm with the
<ENTER>
key.
Identification data - record into the ID memory
1. Press the
<MEM>
key for more than 2 seconds when in weighing operation. The
[MEMORY]
prompt will be displayed.
2. Press the
<ID1>
key to enter ID1 memory. The last used memory code appears (I.e.
[ID1 :
123]
).
3. Enter the desired memory code numerically and press the
<ENTER>
key.
4. The ID code and identification data in the memory appears on the display.
5. Enter the new alphanumeric ID data up to 32 digits and press the
<ENTER>
key.
6. The next memory location code is seen on the display. You can press the
<ENTER>
key to
enter ID data into the following memory or you may repeat from step 3 to enter a new memory
record number.
7. To return to weighing operation press the
<ESC>
key.
Identification data - selection from ID memory
1. Press the identification key
<ID1>
. The ID1 data is displayed.
2. Press the
<MEM>
key to go into the memory.
3. The last used memory code is seen (i.e.
[ ID1 :123]
), enter the ID memory code for the item.
4. Press the
<ENTER>
key to select the identification data which is displayed for a short a while.
The instrument returns to the operating mode after loading the identification data. If there is any
linked memory to the ID memory, the linked memories are selected automatically.
5. Or press the
<ESC>
key to return without any selection.
Data Entry into the memories linked together with ID memory
You may enter data into the related memories together with data entry to the items from ID memories
for easy use as below;
For example, if ID1 is linked with SET and PT memories by parameter
[373]
, the data entry can be
done to the item as described below.
1. Press the
<MEM>
key for more than 2 seconds in weighing operation. The
[MEMORY]
prompt
will be displayed.