PT610, PT620, PT630
Instruction Manual
20
<MRC>
<CHANGE>
Memory Recall Key:
Recall the total in memory. Press for more than 2 seconds
to recall the grand total. Press the key while a total or grand total is displayed to
clear the total.
During configuration this key changes an item or moves into a parameter to select
a digit.
<PCS>
<ESC>
<FASTOPT>
Programmable Function Key:
This key can be programmed to a special
function for quick operation, such as piece counting.
Escape Key:
2
nd
function, press to escape from an entry or operation.
During configuration this key provides fast access to analogue output setup (if
option installed).
<TARE>
<PT>
<FASTCAL>
Tare key:
Press this key to tare the scale and deduct the weight of the container
placed on the platform so as to see the net weight value of the material
subsequently added into or taken out of the container.
Preset Tare:
2
nd
function, when pressed for more than 2 seconds, is to key in a
tare value.
During configuration this key provides fast access to calibration.
<ZERO>
Zero key:
This key adjusts the scale zero when in Gross mode, if there is any
residual weight or drift. Zeroing should be performed when the platform or scale is
empty.
<APW>
<MEM>
<STOR>
Programmable Function Key:
This key can be programmed to a special
function for quick operation, such as Average Piece Weight for piece counting.
Memory Key:
2
nd
function of the key is memory transactions. Press for more than
2 seconds to enter memory functions, or press this key to load any item from
memory (ID, PT, set-point, etc..
During configuration this key provides fast access to storage.
<CLEAR
<SETPT>
<FASTSET>
Tare Clear Key:
Press to clear the tare setting and return to Gross weighing.
Set-Point key:
2
nd
function of the key, press for more than 2 seconds to enter
set-points.
During configuration this key provides fast access to setup.
<ALPHA>
Alphanumeric Key:
For entry of numbers and letters.
<DEL>
Delete Key:
Delete last entered character. Press for more than 2 seconds to clear
all data in the entry field.
<.>
<+/->
<LOCK>
Decimal point Key:
Use for decimal point or period (full stop) entry.
Change Sign Key:
Press to change the set-point value to negative during set-
point entry.
Key Lock:
2
nd
function is to lock/unlock the keypad.
PT630
<ID1>
<BACK>
Identification Data key 1:
Used to enter identification data(1) to associate with
set-points or products.
During configuration this key returns or goes back.
<ID2>
<DOWN>
Identification Data key 2:
Used to enter identification data(2) to associate with
set-points or products.
Programmable Function Key:
This key can also be programmed to a special
function for quick operation.
During configuration this key moves to the next parameter menu item or
decreases the value of the flashing digit.
<M+>
<UP>
Totalising key:
Pressing this key will add the weight to the total in memory.
During configuration this key moves to the next parameter menu item or
increases the value of the flashing digit.
<MRC>
<CHANGE>
Memory Recall Key:
Recall the total in memory. Press for more than 2 seconds
to recall the grand total. Press the key while a total or grand total is displayed to
clear the total.
During configuration this key changes an item or moves into a parameter to select
a digit.
<
☼
>
<ESC>
<FASTOPT>
Programmable Function Key:
This key can be programmed to a special
function for quick operation, such as Average Piece Weight for piece counting.
Escape Key:
2
nd
function, press to escape from an entry or operation.
During configuration this key provides fast access to storeage.
<TARE>
<PT>
<FASTCAL>
Tare key:
Press this key to tare the scale and deduct the weight of the container
placed on the platform so as to see the net weight value of the material
subsequently added into or taken out of the container.
Preset Tare:
2
nd
function, when pressed for more than 2 seconds, is to key in a
tare value.
During configuration this key provides fast access to calibration.