PT PT610 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 92

PT PT610 Скачать руководство пользователя страница 6

www.ptglobal.com

PT610, PT620, PT630

Instruction Manual

2

2 DESCRIPTION

2.1 INTRODUCTION

The PT610, PT620 and PT630 (PT6X0 series) are smart indicators with advanced features for general and

industrial process weighing applications. Powerful PLC integration facilities are available and serial ports
such as RS-232C, RS-485, USB are standard.

A step up from the PT600, the PT610 and PT630 are available with a range of options to connect by various
fieldbus protocols such as Ethernet TCP/IP. Ethernet/IP, Modbus, PROFIBUS, PROFINET, CANopen,

EtherCAT, CC-Link, Powerlink and also along with the PT620 there are options with digital Input/Output and
analogue output.

Powerful calibration options including vCal, Electronic calibration without test weights supporting fast easy
setup and service. The PT6X0 series features adaptive filtering for fast settling, high display resolution and a

speed of up to 800 conversions per second.
It’s small size IP67 stainless steel body is perfect for desk, wall or panel installations and provides a large

display and flexible operator interface.

2.2 STANDARD SUPPLIED ITEMS

The indicator are fitted with mains cable and the following are the items supplied as standard. Please

check the contents of your package before installing and advise PT of any discrepancies.

Indicator

PT610, PT620

PT630

All mating connectors for load cell (7 way), RS232C (3 way),
RS485 (6 way) and mains power (3 way)

Included

USB drive with Manual

Included

2.3 ACCESSORIES SOLD SEPARATELY

The following accessories are available for separate purchase.

•

USB cable with sealing gland.

•

RS-232C cable with null modem wiring and 9 pin connector for PC connection.

•

RS-232C to USB adapter.

•

RS485 cable with USB plug for PC connection.

•

Wall/desk mounting bracket.

•

Column/pole mounting bracket.

•

Swivelling 2D wall mounting bracket.

•

Load cells, cable and junction boxes are available on the PT web site.

As well as the above accessories, the following options are available for separate purchase.
Refer to the table below to verify compatibility with the specific indicator model.

•

Analogue output.

•

Digital input (opto-isolated), relay output.

•

Alibi memory for recording and recalling printed weigh data.

•

Modbus software for onboard ports.

•

Fieldbus option cards (Ethernet (TCP/IP) interface, PROFIBUS DPV1 int 4 Input/5
Relay Output, PROFINET int 4 Input/5 Relay Output, Ethernet/IP int 4 Input/5

Relay Output, CANopen int 4 Input/5 Relay Output, EtherCAT int 4 Input/5
Relay Output, CC-Link int 4 Input/5 Relay Output, Powerlink int 4 Input/5 Relay

Output).

•

Scale input card for optional attachment of a second scale.

«
...
4
5
6
7
8
...
»

Содержание PT610





























































































Отзывы:

Нет отзывов