PT PT610 Скачать руководство пользователя страница 31

Страница: 31 / 92

www.ptglobal.com

PT610, PT620, PT630

Instruction Manual

5.3.6.1 Horizontal Totalling

To accumulate sequential weighings. Using the functions automatic
tare** ( par. 232 ) and automatic clear tare** ( par. 233 ) is suggested

where applicable to reduce the possibility of weighing errors. Refer to
parameter** 324.

1. Press the

<ZERO>

key to zero the empty scale before loading.

2. Load the container on to the scale.
3. Press

<TARE>

key for weighing material in net mode. If automatic

taring is activated and if minimum tare weight [518] is lower than the
container weight on the scale, the scale will be tared automatically.

4. Add the material into the container.
5. Press the

<M+>

key to add to the total and unload the container.

6. Load the next container on to the scale.
7. Repeat from item 3 to weigh following materials.

8. Press the

<MRC>

key to display the total value.

[C 5 MR: 5.003 KG]

9. Press the

<ENTER>

key for printout of the totalisation ticket or press

the

<ESC>

key to resume totalling from item 3.

Delete the total

1. Press the

<MRC>

key to display the total value.

[C 5 MR: 5.003 KG]

2. Press the

<MRC>

key a second time when the total is displaying.

3. Press the

<ENTER>

key and a

[ Delete ? ]

prompt is seen.

4. Press the

<ENTER>

key to delete total and item weights, or press the

<ESC>

key to exit without deleting the total.

Taring a container by entering a preset tare value can be used during
totalling. An example printout is shown to the right.

PT Limited
ptglobal.com
Auckland, NZ

  Date 23.02.2016
  Time 09:16
  CN 34

OPERATOR
JOSEPH SMITH

MATERIAL
POLYETHYLENE

1 Tare 0.102 kg
Net 1.000 kg
2 Tare 0.100 kg
Net 1.001 kg
3 Tare 0.099 kg
Net 1.000 kg
4 Tare 0.100 kg
Net 1.003 kg
5 Tare 0.099 kg
Net 0.999 kg

---------------------
TOTAL

Gross 5.503 kg
Tare 0.500 kg
Net 5.003 kg

* Thank you *

5.3.6.2 Vertical Totalling

To accumulate stacked or additive weighings. Using the functions
automatic tare

[232]

6.3.3.2 and automatic clear tare

[233]

6.3.3.3 is

suggested where applicable to reduce the possibility of weighing errors.
Refer to parameter

[234]

6.3.3.4 .

Note:

The Tare function should be programmed as multitare

“MULT” for vertical totalling. Refer to parameter

[231]

6.3.3.1

1. Press the

<ZERO>

key to zero the empty scale before loading.

2. Load the container on to the scale.
3. Press

<TARE>

key for weighing material in net mode. If automatic

taring is activated and if minimum tare weight

[518]

6.5.1.8is lower than

the container weight on the scale, the scale will be tared automatically.

4. Add the first material into the container.
5. Press the

<M+>

key to add to the total. The scale will be tared

automatically after saving the item weight.
6. Load the next material into the container.

7. Repeat from item 5 to add any following materials.
8. Press the

<MRC>

key to display the total value.

[C 8 MR: 4.206 KG]

9. Press the

<ENTER>

key for printout of the totalisation ticket or press

the

<ESC>

key to resume totalling from item 3.

Delete the total

1. Press the

<MRC>

key to display the total value.

[C 8 MR: 4.206 KG]

2. Press the

<MRC>

key a second time when the total is displaying.

3. Press the

<ENTER>

key and a

[ Delete ? ]

prompt is seen.

4. Press the

<ENTER>

key to delete total and item weights, or press the

<ESC>

key to exit without deleting the total.

Taring a container by entering a preset tare value can be used during
totalling. An example printout is shown to the right.

PT Limited
ptglobal.com
Auckland, NZ

Date 23.02.2016

Time 09:24

CN 54

OPERATOR

JOSEPH SMITH

MATERIAL
POLYETHYLENE

Tare 0.201 kg

1 Net 0.599 kg

2 Net 0.604 kg

3 Net 0.600 kg

4 Net 0.600 kg

5 Net 0.600 kg

6 Net 0.499 kg

7 Net 0.402 kg

8 Net 0.302 kg

---------------------

TOTAL

Gross 4.407 kg

Tare 0.201 kg

Net 4.206 kg

* Thank you *

Содержание PT610





























































































Результаты поиска

Содержание PT610

Отзывы:

PT PT610, Основное руководство пользователя, Страница: 31 / 92

Результаты поиска

Содержание PT610

Отзывы: