Phason Plus Touch Series, Руководство пользователя

Страница: 22 / 93

Chapter 2: Installing the Plus Touch
22
Connecting DOL sensors
Plus Touch gives you the ability to connect DOL 114 temperature and humidity, DOL 19 carbon
dioxide, and DOL 53 ammonia sensors. Connecting the additional sensors gives you the ability to
use modifiers that allow you to override settings when certain conditions are met, such as when
carbon dioxide levels are too high. For more information, read
Programming modifiers
on page 43
To connect DOL 114 sensors
You can connect a DOL 114 sensor to the
TEMP/HUM
connectors as shown in the drawing.
1. Position the jumpers on the pins as shown.
2. Connect the wires from the DOL 114 sensor shown.
To connect DOL 19 sensors
You can connect a DOL 19 sensor to the any of the three
AUX
connectors.
1. Position the jumper on the pins as shown.
2. Connect the wires from the DOL 19 sensor shown.
To connect DOL 53 sensors
You can connect a DOL 53 sensor to the any of the three
AUX
connectors.
1. Position the jumper on the pins as shown.
2. Connect the wires from the DOL 53 sensor shown.