Phason Plus Touch Series, Руководство пользователя

Страница: 64 / 93

Chapter 5: Monitoring and maintaining your Plus Touch
64
4. Press the
Up
or
Down
arrows to adjust the state, output, or reading.
Plus Touch automatically puts the item to manual override.
5. When finished, press
Auto
to return to automatic mode.
Option 2 – single or multiple sensors or equipment
1. Press the
Menu
and then
Manual Override
.
2. Press the sensor or piece of equipment you want to override.
3. Press the
Up
or
Down
arrows to adjust the state, output, or reading.
Plus Touch automatically puts the item to manual override and displays a manual override icon.
4. Repeat steps 2 and 3 for each sensor and piece of equipment you want to override.
5. When finished, press
Auto
to return the selected equipment to automatic, or
Auto All
to return all
equipment.
When finished testing and overriding, set all sensors and equipment to automatic
control. Any sensors or equipment you do not set to automatic will not function
according to normal, programmed settings and will remain in manual override.
Testing a zone ’s sensors and equipment
Overriding a zone sensor allows you to test a zone’s equipment and settings by simulating a range of
temperatures for the zone. As you increase or decrease the test temperature, the variables and relays
operate according to their programmed settings and the test temperature. This gives you an idea of
how your system performs over a full range of temperatures.
To test a zone
Follow the steps in
Using manual override
on page 63 and choose the zone sensor at the item you
want to override.