Phason Plus Touch Series Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 93

background image

Limited warranty

This warranty applies only to the Phason Plus Touch (PLUS-TOUCH). If you need warranty
service, return the product and original proof of purchase to your dealer.

Phason Inc. (Phason) warrants the PLUS-TOUCH subject to the following terms and conditions.
This warranty is valid only to the original purchaser of the product, for two years from the

manufacturing date. The manufacturing date is stated in the first eight digits of the serial number
in the form year-month-day.
Phason hereby warrants that should the PLUS-TOUCH fail because of improper workmanship,
Phason will repair the unit, effecting all necessary parts replacements without charge for either

parts or labor.

Conditions



Installation must be done according to our enclosed installation instructions.



The product must not have been previously altered, modified, or repaired by anyone other
than Phason.



The product must not have been involved in an accident, misused, abused, or operated or
installed contrary to the instructions in our user and/or installation manuals. Phason's

opinion about these items is final.



The person requesting warranty service must be the original purchaser of the unit, and

provide proof of purchase upon request.



All transportation charges for products submitted for warranty must be paid by the

purchaser.

Except to the extent prohibited by applicable law, no other warranties, whether expressed or

implied, including warranties of merchantability and fitness for a particular purpose, shall apply to
the PLUS-TOUCH. Any implied warranties are excluded.
Phason is not liable for consequential damages caused by the PLUS-TOUCH.
Phason does not assume or authorize any representatives, or other people, to assume any

obligations or liabilities, other than those specifically stated in this warranty.

Phason reserves the right to improve or alter the PLUS-TOUCH without notice.

«
...
90
91
92
93
»

Содержание Plus Touch Series






























































































Отзывы:

Нет отзывов

Похожие инструкции для Plus Touch Series

Бренд: Samson Страницы: 36

Бренд: FBII Страницы: 71

Бренд: CAME Страницы: 4

Бренд: E-fly Страницы: 16

Бренд: Ebyte Страницы: 34

Бренд: YASKAWA Страницы: 61

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 8

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Taco Electronic Solutions Страницы: 28

Бренд: Fox Страницы: 5

Бренд: Belimo Страницы: 9

Бренд: Belimo Страницы: 2

Бренд: Rauch Страницы: 85

iMO-LEARN - MDM

Бренд: i3-TECHNOLOGIES Страницы: 2

ROC 1407 - CODE

Бренд: THOMSON Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды