B-4
04/18/00
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456
Appendix B
PI7C7100
3-Port PCI Bridge
ADVANCE INFORMATION
6.
Turn on the power for the system. Your OS should already have drivers for the PI7C7100 evaluation board.
In Win9X, Plug and Play should detect the device as a PCI-to-PCI bridge. The system may prompt you for the
Win9X CD for the drivers. The OS will detect two PCI-to-PCI bridges as the PI7C7100 has two secondary PCI
buses. In Win NT, you should not have to install drivers.
7.
Install drivers for any PCI devices you have attached to the evaluation board.
8.
If any of the steps are unclear or were unsuccessful, please contact your Pericom support person
at 408-435-0800.
9.
Thank you for evaluating Pericom Semiconductor Corporation’s products.
General Information
(continued)