Panasonic BB-HNP17A, Руководство по эксплуатации

Страница: 80 / 192

2.
Click and select [Start Sound Detection Recording] from the menu displayed.
•
Starts sound detection recording by the selected camera.
•
To stop recording from a camera, select the camera, click , and select [Stop Sound Detection
Recording] from the menu which is displayed.
Note
•
Set the sensitivity of single sound detection on the settings page for the camera.
•
Recording will not stop even if you close the operating window with .
When is displayed in the notification area, the recording software is running. (
®
Page 10)
•
You can set the camera to record a certain number of seconds before and after a sound is detected.
Make these settings having performed actual sound detection to ascertain that the intended sound
detection is indeed taking place.
•
Sound detection commands can be selected and executed. (
®
Page 40)
•
A continuous image is recorded if after-sound detection recording and before-sound detection
recording overlap.
Example: You have set images to be recorded 5 seconds before and after sound detection.
5 sec. 5 sec.
5 sec. 5 sec.
Sound signal
is detected
Sound signal
is detected
1 image is recorded.
•
Detection notifications and images captured at detections can be sent to specified E-mail addresses.
(
®
Page 19)
2.5.7 Shock Detection Recording
Shock detection recording will begin when a shock is detected by the camera.
Set the recording time for shock detection recording for each camera. (
®
Page 42)
Shock detection recording can only be set up for cameras that connect in JPEG format.
If the MPEG-4/H.264 format is selected, change the format to JPEG. (
®
Page 28)
1.
From the multi-monitoring window, select a camera for shock detection recording.
•
A green frame is displayed around the selected camera.
2.
Click and select [Start Shock Detection Recording] from the menu displayed.
•
Starts shock detection recording by the selected camera.
•
To stop recording from a camera, select the camera, click , and select [Stop Shock Detection
Recording] from the menu which is displayed.
Note
•
Set the shock detection sensitivity on the settings page for the camera.
•
Recording will not stop even if you close the operating window with .
When is displayed in the notification area, the recording software is running. (
®
Page 10)
80 Operating Instructions
2.5.7 Shock Detection Recording