Setting
Description
User Name/Password
If the camera has security settings enabled (authentication setting),
enter the administrator user name and password for the camera. (Enter
the alphanumeric characters. 4 to 32 characters.)
If you set a general or unregistered user name and password, this
software may not work properly.
•
Password are encrypted when saved.
•
Only Basic authentication can be used as an authentication method.
Digest authentication is not supported.
Proxy
If the camera uses a proxy server, select [Used]. (Cameras that are
registered using an IPv6 address cannot be used with a proxy server.)
Set up the proxy server before using a proxy. (
®
Destination Folder
Specify the recorded image's destination folder for individual
cameras.
Click [Browse] and designate the destination folder when changing the
destination.
•
Due to the operating system specifications (UAC: User Account
Control) of Windows Vista and Windows 7, when [Program Files] of
the start-up drive is specified in the destination folder, recorded
images are automatically saved in separate folders. When this
software is installed to C:\Program Files\Panasonic\NCR4 in
Windows Vista and Windows 7, folders are saved to: C:\User\(user
name)\AppData\Local\VirtualStore\Program Files\Panasonic
\Ncr4\ncrdata. Do not directly set the [AppData] folder as the
destination folder.
Video Channel Settings
After executing [Check the Camera Function], [Video Channel
Settings] is only displayed when network video encoders, or 360°
network cameras that have image capture mode set to quad streams
are recognized.
In the [Video Channel Settings] you can select which video channel is
used.
Note
•
The default camera name is [New Camera], followed by a number.
The number is generated automatically. Default values are used for the other settings.
Operating Instructions
25
2.1 Registering the Camera
