Message
Cause and Remedy
Keyword 2 should be 40 characters or
less.
•
The Keyword2 was more than 40 characters.
→
Enter Keyword 2 within 40 characters.
Snapshot
A snapshot writing error has occurred.
•
If a writing error occurred when saving a file, or the file has
been opened by another application.
→
Confirm that you have write permission for the save
destination.
→
Close the application that opened the file and try again.
Playback
The current minute of the recording
images cannot be played.
→
The current minute of the recording images cannot be
played.
Maximum selected number is **. Cancel
the camera selection, and try again.
→
Cancel the camera selection and try again.
The recording is not finished so it cannot
be played back.
→
Wait for a moment and try searching again.
Record
Message
Cause and Remedy
"**" has reached its recording capacity.
Delete recorded images.
•
**=
•
Camera Name
•
Save Destination Folder
•
The recorded images of the camera or recorded images of
the destination folder have reached the limit of recording
capacity and recording is stopped.
→
Delete unnecessary files to increase the recorded image
capacity.
→
Change the settings for the recorded image capacity
limit and set the action [Delete old files and keep
recording] for when the recorded image capacity is
reached.
Recording has stopped because the free
disk space is under 10%. Confirm that
there is sufficient free space on the save
destination disk.
•
Recording has been stopped because there is less than
10% remaining capacity in the destination disk or the
destination disk is not in a writable condition.
→
Create enough free space on the destination folder.
→
Confirm that there is a folder. If there is not, create it.
→
Check if the folder is writable, and set it writable.
→
Change the destination folder.
There is only ** GB of space in the save
destination disk. Select a disk that has 1.2
GB of space or more.
•
The save destination free space is less than 1.2 GB.
→
Select a disk with 1.2 GB or more of free space.
Images could not be acquired for one
minute. Confirm the camera connection. In
order to stop this message being
displayed, clear the 'Display the error
message if the images could not be
acquired for one minute during recording'
checkbox in the image settings.
→
Check camera connection. If you do not want this message
to be displayed again, clear the "Display the error message
if the images could not been able to be acquired for one
minute during recording" in the image settings.
Operating Instructions
181
5.3 Error Message List
