Click the cells that you want to disable in
the motion detection monitoring window.
•
Disabled areas are darkened.
You can set multiple disabled areas.
•
Click the cells that you want to disable.
By dragging the mouse (moving the mouse
while holding down the left button), you can
quickly select multiple cells.
After releasing the mouse, the disabled
area is set.
Re-enabling a disabled area
You can re-enable a disabled area by clicking the cells in the disabled area.
Note
•
If you set the date and time to be displayed on the camera images in the camera settings, disable the
area where the date and time are displayed in order to not detect that motion.
Pop-up display
Select the [Pop-up the camera image] check box under [Operating at the time of detection] to show a pop-up
display of detected images when motion is detected.
Operating Instructions
35
2.2 Setting Cameras
