Panasonic AJ-HPM200 Скачать руководство пользователя страница 86

Страница: 86 / 218

Editing: Preparing for Playlist Creation

Preparing for Playlist Creation

This chapter will describe the setup required prior to creating

playlists.

Use setup menu No. 25 (SYSTEM FREQ) to adjust the system

frequency. Setting the system frequency determines what

playlist formats are available.

A playlist format is the format that a playlist can handle and is

determined using a combination of the setup menus given

below.

For details on each menu, refer to “Setup” (page 155).

The playlist format is set when a new playlist is created. Thus

a new playlist must be created when a change in playlist

format is made.

During playlist playback, you can select whether the time

code should be replaced and output as a continuous value or

the separate time code of each clip should be retained.

You can set the time code start value when it is replaced at

output.

Press the PLAY LIST button to open the playlist

screen.

Press the MENU button.

Use the cursor buttons to choose [SETTING] –

[REPLACE TC] – [REPLACE] and press the SET

button.

Select [ON] and press the SET button.

This setting replaces the time code during playback.

◆

NOTE:

• When set to [OFF], the time code is not replaced, instead the

time code of each clip is output. Then the drop-frame flag of the

clip referenced by the first event is used by all drop-frame flags

in the playlist.

• During playback or Edit Copy on the recorder, the time code of

the video track clips is output intact and this may result in non-

continuous time code. [ON] is therefore the normal

recommended setting.

• When set to [OFF], go to step 7 and end setup.

Use the cursor buttons to choose [SETTING] –

[REPLACE TC] – [START TC] and press the SET

button to enter the start value of the time code.

The initial value is 00:00:00:00.

Use the cursor buttons to choose [SETTING] –

[REPLACE TC] – [DROP FRAME]. Then press the

SET button and select [DF] (drop frame) or [NDF]

(non drop frame).

◆

NOTE:

• A [DF] setting cannot be made for a playlist in the 24PN format.

• [DROP FRAME] does not appear when 50, 25 or 60-25 is

selected in setup menu No.25 (SYSTEM FREQ).

• When an event is imported from a VTR or other external device

during control via the REMOTE connector, a clip is created

(recorded) from the external device when a playlist is

registered. Events in a playlist follow the [REPLACE TC] setting,

but the clip that is the source of the event retains its original time

code.

Press the MENU button to end setup.

Set the preroll time for preview or voice-over recording.

Press the MENU button, use the cursor buttons to

choose [SETTING] – [PREROLL TIME] and press

the SET button.

Setting System Frequency

Setting Playlist Format

No.020

SYS FORMAT

No.024/025

REC FMT(SD)/REC FMT(HD)

No.026

PLY LST FMT

Setting the Playback Time Code
(TC)

Other Settings

Setting preroll time

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды