Panasonic AJ-HPM200 Скачать руководство пользователя страница 114

Страница: 114 / 218

114

Connections: Using This Unit With a Hard Disk

Using This Unit With a Hard Disk

This unit supports the following hard disks types.

• Panasonic portable hard disk unit P2 store (AJ-PCS060G)

• A hard disk that supports the USB 2.0 interface

• A hard disk that supports the eSATA interface

◆

NOTE:

• It may not be possible to connect an eSATA hard disk that does not support the LINUX operating system.

• Some eSATA hard disks may prolong the startup time of the unit.

• The unit supports P2 store only in version Ver2.** or later version. P2 store hard disk in Ver1.** cannot be connected.

Upgrade a hard disk in Ver1.** to the latest version before use.

Available functions depend on the type of hard disk used. Hard disk type is displayed next to the “PARTITION:” on the left side

of the hard disk explorer screen.

➝

Refer to “Displaying Hard Disk Information (Explorer Screen)” (page 118).

◆

NOTE:

• This unit supports USB bus power (5 V, 0.5 A) but some hard disks may not be able to start up using USB bus power. Should this happen,

provide the hard disk with a separate power supply.

• This unit does not support hard disks that are 2 TB (2048 GB) or larger.

(Hard disk types and available functions)

*1: Adding clips to a partition will prevent writing back data by the card to that partition.

*2: This enables up to 100 folders in up to three levels. Folders appear in order from the top level. Long file names and two-byte character file

names are not supported.

Example:

Supported Hard Disks

Hard disk types and available functions

Hard

disk type

Features

Available functions

Thumbnail

display

P2 card unit

Clip unit

Playback

check

Use of

playlists

Displaying

clips

Format

➝

HDD

➝

HDD

➝

TYPE S

A special disk format for high-speed

writing/loading data by P2 card unit.

P2STORE The P2 Store (AJ-PCS060G) hard

disk. Cannot be used for writing data.

FAT

A hard disk whose primary partition

is formatted either using FAT16 or

FAT32.

The root partition or “CONTENTS”

directory under any directory is used.

OTHER

Hard disk other than those above

* NTFS or other hard disk using a file

system other than FAT16 or FAT32.

/CONTENTS

Can be displayed

/SAMPLE/CONTENTS Can

displayed

/SAMPLE/20090101/CONTENTS

Can be displayed

/SAMPLE/20090101/1200/CONTENTS

Cannot be displayed

➝

This is the fourth level and will therefore not appear.

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды