Panasonic AJ-HPM200 Скачать руководство пользователя страница 4

Страница: 4 / 218

Read this first! (For AJ-HPM200P) (continued)

FCC NOTICE (U.S.A.)

Declaration of Conformity

Model Number:

AJ-HPM200P

Trade Name:

Panasonic

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ07094

Support contact:

Panasonic Broadcast & Television Systems Company

1-800-524-1448

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any unauthorized

modifications.

Note:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.

Warning:

To assure continued FCC emission limit compliance, follow the attached installation instructions and the user must use only

shielded interface cables when connecting to host computer or peripheral devices. Also, any unauthorized changes or

modifications to this equipment could void the user’s authority to operate this device.

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды