200
For Long and Trouble-Free Operation: Error Messages
Thumbnail
NO SD CARD!
No SD memory card is inserted.
Insert an SD memory card.
NOT SELECTED!
An attempt was made to delete an unselected
clip.
Select the clip you want to delete.
PING FAILED!
CHECK LOG or
SET FTP-URL
PING failed.
Check if LAN setup, FTP client URL and LAN cable
connection are correct.
SAME CLIP IS
SELECTED!
The selected clips contain multiple copies of the
same clip (duplicated using COPY).
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect
all identical copies from the selected clips.
TOO MANY CLIPS!
Too many clips are selected.
Reduce the number of selected clips.
UNKNOWN
CONTENTS
FORMAT!
This warning appears when data not compatible
with the unit is detected.
Match devices and contents version.
UNKNOWN DATA!
The metadata character code is invalid.
Use UTF-8 for the metadata character code. Use the
viewer to enter correct characters.
USER CLIP NAME
MODIFIED!
Characters in the clip name had to be deleted in
adding the counter value.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip name
are automatically deleted when the total exceeds
100 bytes.
WRITE PROTECTED!
The P2 or SD memory card is write protected.
Insert write-enabled media.
Hard disk
CANNOT ACCESS
CARD!
An error occurred during P2 card access.
Check P2 card.
CANNOT ACCESS
TARGET!
An error occurred during hard disk access.
Check hard disk status and connection.
CANNOT COPY!
FORMAT HDD TO
FAT
Clips cannot be copied to hard disk without
partitions.
Format using a FAT format or export data from a P2
card to create a partition.
CANNOT FORMAT!
The hard disk cannot be initialized.
Connect another hard disk drive.
CANNOT
RECOGNIZE HDD!
The destination target cannot be properly
recognized.
Reboot the hard disk or connect a different hard
disk.
CANNOT SELECT!
MAX.6 PARTITIONS
It is not possible to mount more than 6 hard disk
partitions simultaneously.
Cancel some of the selected partitions.
CARD IS EMPTY!
CANNOT COPY!
The P2 selected for copying is empty.
Copying is not performed since the card is empty.
FORMAT P2 CARD!
Importing is not possible to a P2 card containing
clips.
Format the P2 card.
HDD CAPACITY
FULL!
Not enough space left on the hard disk.
There is not enough space on the connected hard
disk. Use a new hard disk or formatted hard disk.
HDD
DISCONNECTED!
The unit is not connected to a hard disk.
Reconnect the USB cable. If the hard disk does not
operate normally, turn it off and turn it back on again.
MISMATCH
COMPONENT!
Copying is not possible since the model numbers
of the two cards differ.
Use a P2 card with the same model number or
import video in clip units.
P2 CARD IS
UNFORMATTED!
The P2 card is not formatted.
Use a formatted P2 card.
TOO MANY
PARTITIONS!
There are too many partitions.
Hard disks can handle up to 23 partitions. Use a new
hard disk or formatted hard disk.
TOO MANY
TARGETS!
Multiple devices are connected.
Disconnect devices, turn off the unit and turn it back
on again.
UNKNOWN DEVICE
CONNECTED!
The connected DVD drive is not compatible.
Disconnect devices, turn off the unit and turn it back
on again.
VERIFICATION
FAILED!
The compare check after copying failed.
Copy the data again.
On-screen
keyboard
CANNOT CHANGE!
An attempt was made to change PERSON when
no text memo had been entered.
First enter a text memo.
CANNOT SET!
INVALID VALUE!
The entered value is invalid.
Enter a valid value.
Item
Message
Description
Measure
