Panasonic AJ-HPM200 Скачать руководство пользователя страница 38

Страница: 38 / 218

Introduction: Recording, Playback and P2 Card Handling

◆

NOTE:

• Detailed check of P2 card status is possible. Refer to “Checking

Card Status” on page 71.

Recording time on a single 64 GB P2 card

*1: Includes recording of DVCPRO HD with pull-down at 30P, 24P and

25P.

*2: For 2-channel audio recording

*3: Includes recording at 30P, 24P and 25P with pull-down.

◆

NOTE:

• This unit cannot use AJ-P2C002SG (2 GB) cards.

• The recording time of 32 GB, 16 GB and 8 GB P2 cards are 1/2, 1/

4 and 1/8, respectively of that provided by a 64 GB P2 card.

●

Visit the web site below and go to P2 support desk page for the

latest information on P2 card and SD/SDHC memory cards.

For English:

https://eww.pavc.panasonic.co.jp/pro-av/

A continuous recording that is longer than the durations given

below when an 8 GB P2 card is used in this unit will result in

the automatic division of the recording into different clips.

Even so, the recordings on the two clips can be handled as a

single clip in thumbnail operations (display, delete, repair,

copy, etc.) on a P2 device.

Such a recording may be handled as separate clips in

nonlinear editing software or on PCs.

P2 card access LEDs and P2 card status

P2 card access LED

P2 card status

Green light

Reading and writing are possible.

Orange light

Reading and writing are possible.

The card is selected for recording

(including loop recording).

Flashes orange

Reading or writing is being

performed.

The unit is in USB DEVICE mode

and is accessing a P2 card.

The unit is in LAN mode, and a P2

card can be accessed or is being

accessed.

◆

NOTE:

• Do not turn the unit off or remove a

P2 card during recording or when

the LED flashes orange.

Flashes rapidly in

orange

P2 card is being recognized.

Flashes green

The P2 card has no remaining

memory capacity. Available only

for reading.

The write-protection switch on the

P2 card is set to [PROTECT].

Available only for reading.

Off

The P2 card is not properly

formatted. Reformat the card on

this unit.

This card cannot be used in this

unit. Replace the card.

No P2 card has been inserted.

The unit is in the USB DEVICE

mode and is not accessing the P2

card.

P2 card and recording times

HD mode

Video format

Recording format and recording times

DVCPRO HD AVC-Intra100

AVC-Intra50

1080-59.94/

50i

Approx.

64 min.

Approx.

64 min.

Approx.

128 min.

1080-30PN/

25PN (Native)

----

Approx.

64 min.

Approx.

128 min.

1080-24PN

(Native)

----

Approx.

80 min.

Approx.

160 min.

720-59.94P/

50P

Approx.

64 min.

Approx.

64 min.

Approx.

128 min.

720-30PN/

25PN (Native)

Approx.

128 min.

Approx.

128 min.

Approx.

256 min.

720-24PN

(Native)

Approx.

160 min.

Approx.

160 min.

Approx.

320 min.

SD mode

Video format

Recording format and recording times

DVCPRO 50

DVCPRO

480-59.94i/

576-50i

Approx.

128 min.

Approx.

256 min.

Approx.

256 min.

Dividing clips over 4 GB in length

Recording format

Recording duration

DVCPRO HD

Approx. 5 min.

DVCPRO50

Approx. 10 min.

DVCPRO/DV

Approx. 20 min.

AVC-Intra50

Approx. 10 min.

AVC-Intra100

Approx. 5 min.

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды