Panasonic AJ-HPM200 Скачать руководство пользователя страница 127

Страница: 127 / 218

Connections: Connecting This Unit to a Network

127

C
onn

ect
ion
s

Setting:

◆

NOTE:

• When NETWORK is set to ENABLE, starting up may take longer time since the unit will connect to the network when it is turned on.

• The network cannot be accessed when NETWORK is set to DISABLE. A switch between ENABLE and DISABLE does not take effect until the

unit is restarted.

• A change in setting may lengthen the time required for the setup screen to close since the network service will have to be restarted using a

different setting.

• When DHCP is set to ENABLE, settings other than MAC ADDRESS and NETWORK are disabled.

• IP address, subnet mask and default gateway must be correctly combined.

If the “CANNOT ACCESS GATEWAY!” warning appears as the setup screen closes, consult the network administrator.

• Set 0.0.0.0 when default gateways or DNS will not be used.

• DHCP and DNS may not operate properly in some network environments.

Follow the steps below to make the required settings such as

an address of connection server to use the FTP client to

transfer clips or the HTTP browser.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to choose [NETWORK] -

[SETUP] - [CLIENT] and press the SET button.

The client setup screen appears.

Current settings appear.

Use the cursor buttons to select an item and press the SET

button to set it.

FTP CLIENT:

• If you forgot the set password, etc., choose [NETWORK] - [INITIALIZE] in the menu and press the SET button to initialize the

settings. This clears user ID and password.

Item

Description

Set value

Factory defaults

MAC ADDRESS

MAC ADDRESS (unique ID)

Cannot be changed.

Set value (cannot be

changed)

DHCP

DHCP setting

ENABLE:

Uses DHCP (automatic assignment) DISABLE

DISABLE:

Does not use DHCP (automatic

assignment)

IP ADDRESS

IP address

Enter using the ten keypad

192.168.0.2

SUBNET MASK

Subnet mask

Enter using the ten keypad

255.255.255.128

DEFAULT GATEWAY

Default gateway

Enter using the ten keypad

192.168.0.1

PRIMARY DNS

Set primary DNS server

Enter using the ten keypad

0.0.0.0

SECONDARY DNS

Set secondary DNS server

Enter using the ten keypad

0.0.0.0

NETWORK

Network service start setting

ENABLE:

Starts network service when the unit is

turned on.

DISABLE

DISABLE:

Does not start network service.

Client setting

Item

Description

Setup procedure

Factory defaults

URL

Name or address of

connection server

Enter using the full keyboard. (up to 500 characters).

No setting

USER ID

ID of the user making the

connection

Enter using the full keyboard. (up to 31 characters)

No setting

USER PASSWORD

Password for user making the

connection.

Enter using the full keyboard. (up to 31 characters)

No setting

SSH

Set to use SSH for file

transfers.

ENABLE:

Enables SSH.

DISABLE

DISABLE:

Disables SSH.

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды