Panasonic AJ-HPM200 Скачать руководство пользователя страница 130

Страница: 130 / 218

130

Connections: Connecting This Unit to a Network

Use the cursor buttons to select [YES] when the

message [SURE?] appears and press the SET

button.

■

Saving settings to an SD memory card

Open the network screen.

Press the MENU button.

Use the cursor buttons to choose [SAVE TO SD

CARD] and press the SET button.

Enter a file name in the screen for entering file names

that appears.

Numeric characters indicating the date and time are

automatically entered for the name of the new file. Use the

full keyboard to change it as required.

➝

Refer to “Using the Full Keyboard” (page 35).

Select [OK] and press the SET button or ENTRY

button.

◆

NOTE:

• File names must not be longer than 8 characters.

• LAN, client and server settings can be saved and loaded at a

time (regardless of whatever screen is open).

• User settings in the server setup screen and FTP USER

PASSWORD in the client setup screen cannot be saved or

loaded.

Use the steps below to check FTP client network connection.

■

Checking connection (PING)

Open the thumbnail screen.

Press the MENU button to open the menu.

Use the cursor buttons to choose [NETWORK] –

[TOOLS] – [PING] and press the SET button.

Check the status of set address connection.

When connection is confirmed, “PING SUCCESSFUL!”

appears.

“PING FAILED!” appears if a connection cannot be

established within 30 seconds. Use the log described in

the next section to determine the cause of a failure.

■

Opening the connection log (LOG)

Open the thumbnail screen.

Press the MENU button to open the menu.

Use the cursor buttons to choose [NETWORK] –

[TOOLS] – [LOG] and press the SET button.

Check the content of the log.

To return to the menu after checking, press the EXIT

button.

◆

NOTE:

• The content of the log is cleared every time a connection

(except PING) is made to an FTP server.

• Some operations may not generate any data in the log.

• The password is indicated as “*” in the log.

■

Status display

Open the thumbnail screen.

Press the MENU button to open the menu.

Use the cursor buttons to choose [NETWORK] –

[STATUS] and press the SET button.

Connection status is displayed.

To return to the menu after checking, press the EXIT

button.

◆

NOTE:

• Status data is not updated in real-time. To view the most recent

data, perform the steps above again.

• When the DHCP setting is set to ENABLE, displayed value may

differ from the LAN setup.

• In DHCP setup, status information is not correctly displayed

when address information is being obtained.

• The default gateway is not displayed as status information if not

correctly set up.

• A LAN setup that contains a secondary (substitute) DNS but no

primary (priority) DNS is indicated as DNS1.

■

Initializing network settings (INITIALIZE)

Open the thumbnail screen.

Press the MENU button to open the menu.

Use the cursor buttons to choose [NETWORK] –

[INITIALIZE] and press the SET button.

When initialization completes the menu reappears.

Tools for checking operation, status
indication and initialization

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды