Omron V640-HS61, Руководство пользователя, Страница: 64 / 174

62
SE
CTION 3
Set
ting
t
he Communica
tions
Co
ndi
tions
f
or t
he CIDRW Cont
roller
CIDRW System
User’s Manual
SECTION 3
Preparing for Communications
Set Software Revisions
The operations of the V700-L22 can be changed to match those of the previous model, the V700-L21.
The commands, and the parameters that can be set are indicated below.
The V700-L22 mode is upwardly compatible with the V700-L22-V2 mode.
1.
Specify the parameters to be changed.
When the first parameter is specified, the ALARMS indicator flashes.
2.
Confirm the parameter change.
The input parameter is checked and written.

Check for Correct Setting
The currently set data can be output so that you can check if it is correct.
1.
Send the parameter output command "::GET_VER" from
the host device.
The software revision settings are displayed.
List of Commands
Designation Command input Explanation
Parameter designation (Tag name) = (Set value) <CRLF> Specify the parameter value corresponding to the tag name.
Parameter confirmation ::END Checks the parameter designations that have been received so
far and, if there is no error, confirms the settings.
Comment # (Comment) <CRLF>
or
CRLF This is ignored as the comment line.
Tag Name List
Parameter ID Tag name
Setting range Default setting
V700-L22 V700-L22-V2 V700-L22 V700-L22-V2
Software revision RVER 2.00: in V700-L22
mode
1.10: in V700-L21
mode 3.00: in V700-L22-
V2 mode
1.10: in V700-L21
mode 2.00 3.00
RVER=1.10
::END
_
::GET_VER
RVER=1.10
::END
_